Printable version

Drivers & software

Important Note Not the product you are looking for? If you cannot find your product on this site, go to HP Support Center .

T700 Firmware

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - UPS
Version: 4.02(15 Feb 2006)
Operating System(s): OS Independent
File name: sp32149.exe (1.4 MB)
This SoftPaq contains the Firmware for Compaq UPS T700.

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Updated the following:
Buck Transfer Mode

    On Japan model, buck transfer point moved from 106V to 110V and the buck comeback from 103V to 107V.
REPO ALARM
    Eliminate the REPO alarm.
    Remote Emergency Power Off is not supported on this product.
Fan Issue
    Reduce the fan speed in float mode to reduce the noise.
    C.C mode: Full speed fan.
    Float mode: Reduced speed fan.
    Rest mode: Boost status, reduced speed fan; Normal and buck status, fan off.
Transfer time at low line and high line
    At low line and high line, change the utility sensing algorithm to make the transfer time drop from 80mS to 6mS

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

d9e603eb4fe072e1bda72e473f71a552 sp32149.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:
Download the SoftPaq to a directory on your hard drive and change to that directory. This executable file is downloaded as a self extracting compressed file. Run the file to extract the required flash utility and firmware.

From the specified drive and directory, execute the Flash utility and follow the on-screen instructions. (See Note)*

    Note: Use the detailed Word document instructions located within the extracted files to perform the Firmware Flash Procedure.

End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Notes:
This firmware is designed to upgrade the firmware of the T700 model UPS (Japan ONLY).

Low-Voltage Models
204015-291 100V

NOTE: Part Number 204015-001 is user selectable for 110V, or 120V via front panel.


Version:4.02 (15 Feb 2006)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Updated the following:
Buck Transfer Mode

    On Japan model, buck transfer point moved from 106V to 110V and the buck comeback from 103V to 107V.
REPO ALARM
    Eliminate the REPO alarm.
    Remote Emergency Power Off is not supported on this product.
Fan Issue
    Reduce the fan speed in float mode to reduce the noise.
    C.C mode: Full speed fan.
    Float mode: Reduced speed fan.
    Rest mode: Boost status, reduced speed fan; Normal and buck status, fan off.
Transfer time at low line and high line
    At low line and high line, change the utility sensing algorithm to make the transfer time drop from 80mS to 6mS

Version:4.01.0 (A) (31 Dec 2001)
Enhancements
Initial release.


Subscribe to driver and support alerts

Sign up now for customized driver, security, patch, and support email alerts.
Type: Firmware - UPS
Version: 4.02(15 Feb 2006)
Operating System(s):
OS Independent

Description

This SoftPaq contains the Firmware for Compaq UPS T700.

Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Updated the following:
Buck Transfer Mode

    On Japan model, buck transfer point moved from 106V to 110V and the buck comeback from 103V to 107V.
REPO ALARM
    Eliminate the REPO alarm.
    Remote Emergency Power Off is not supported on this product.
Fan Issue
    Reduce the fan speed in float mode to reduce the noise.
    C.C mode: Full speed fan.
    Float mode: Reduced speed fan.
    Rest mode: Boost status, reduced speed fan; Normal and buck status, fan off.
Transfer time at low line and high line
    At low line and high line, change the utility sensing algorithm to make the transfer time drop from 80mS to 6mS

Installation Instructions

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

d9e603eb4fe072e1bda72e473f71a552 sp32149.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:
Download the SoftPaq to a directory on your hard drive and change to that directory. This executable file is downloaded as a self extracting compressed file. Run the file to extract the required flash utility and firmware.

From the specified drive and directory, execute the Flash utility and follow the on-screen instructions. (See Note)*

    Note: Use the detailed Word document instructions located within the extracted files to perform the Firmware Flash Procedure.

Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Notes:
This firmware is designed to upgrade the firmware of the T700 model UPS (Japan ONLY).

Low-Voltage Models
204015-291 100V

NOTE: Part Number 204015-001 is user selectable for 110V, or 120V via front panel.


Revision History

Version:4.02 (15 Feb 2006)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Updated the following:
Buck Transfer Mode

    On Japan model, buck transfer point moved from 106V to 110V and the buck comeback from 103V to 107V.
REPO ALARM
    Eliminate the REPO alarm.
    Remote Emergency Power Off is not supported on this product.
Fan Issue
    Reduce the fan speed in float mode to reduce the noise.
    C.C mode: Full speed fan.
    Float mode: Reduced speed fan.
    Rest mode: Boost status, reduced speed fan; Normal and buck status, fan off.
Transfer time at low line and high line
    At low line and high line, change the utility sensing algorithm to make the transfer time drop from 80mS to 6mS

Version:4.01.0 (A) (31 Dec 2001)
Enhancements
Initial release.