Printable version

Drivers & software

Important Note Not the product you are looking for? If you cannot find your product on this site, go to HP Support Center .

* RECOMMENDED * UPS Firmware Upgrade Utility for HP T1000 G2 Low Voltage Japan/Taiwan

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - UPS
Version: 2360 Rev A(1 Feb 2008)
Operating System(s): Microsoft Windows 2000
Microsoft Windows Server 2003
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2003 64-Bit Edition
Microsoft Windows Storage Server 2003
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows Unified Data Storage Server 2003 x64 Edition
Microsoft Windows XP 64-Bit Edition
Microsoft Windows XP Professional
Microsoft Windows Server 2008 Itanium
File name: SP38390.EXE (1.8 MB)
This utility is used to upgrade the firmware on the HP T1000 G2, Japan/Taiwan model UPS.

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

4f6ad5402b26faab54e298e9d8eb753c SP38390.EXE

Installation:

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change
to that directory.  The file that is downloaded is an executable with
a filename according to the SP Number above.

2. Run the SP executable to unpack the firmware and release information.

3. From that SP directory, use the detailed instructions located in
the file to perform the upgrade.

4. Please read the procedures before upgrading.


End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


 

This firmware fixes the 14 day timer self test Low (Battery) Voltage Cutoff threshold which was inadvertently

set too high causing a false 'Replace Battery' error.

 

Version:2360 Rev A (1 Feb 2008)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


 

This firmware fixes the 14 day timer self test Low (Battery) Voltage Cutoff threshold which was inadvertently

set too high causing a false 'Replace Battery' error.

 


Version:692233 Rev E (15 Oct 2007)
Fixes

Fixed the self test bug by integrating 2314 x016:
An issue was fixed in the disconnected battery test routine that causes an erroneous replace battery fault in the event that VbattAtSelfTestStart is greater than InstantVBatt. 

(Meaning vbatt after disconnected vbatt test is greater than it was before the test)

 

 


Version:692233 Rev E (15 Oct 2007)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


 This firmware fixes a condition that shows every 2 weeks when the 14-day timer test section of the disconnected battery test routine runs. The timer test causes an erroneous ‘Replace Battery’ fault when the value "VbattAtSelfTestStart" is greater than "InstantVBatt". The battery failure condition can be cancelled manually by performing the manual battery test in HP Power Manager.

 

 


Version:692233 Rev D (23 Jul 2007)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


 This firmware 692233 Rev D fixes the following issues:

1. UPS may wake up early after scheduled shutdown. 

2. When the UPS is in a cold environment, the UPS may report to the software that the UPS internal temperature is very high. 


Version:692233 Rev C (31 Aug 2006)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


This fix corrects an error that causes, on rare occasions, the auto restart flags to not work properly. 

The transition from Standby to Line, via the Delay-Before-Startup option, now resets receptacles that are configured to ramp. 

The Cut (buck) point for the 100V setting has been changed as follows:
Original values: Cut1Set = 106V; Cut1Reset = 103V
New Values:     Cut1Set = 111V; Cut1Reset = 106V

(Please note that this change applies to all models that have the 100V selection.)

Limited the maximum ramp and shed delays to 2^16 sec (65536 sec = 1092 min = 18.2Hr). 



Subscribe to driver and support alerts

Sign up now for customized driver, security, patch, and support email alerts.
Type: Firmware - UPS
Version: 2360 Rev A(1 Feb 2008)
Operating System(s):
Microsoft Windows 2000
Microsoft Windows Server 2003
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2003 64-Bit Edition
Microsoft Windows Storage Server 2003
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows Unified Data Storage Server 2003 x64 Edition
Microsoft Windows XP 64-Bit Edition
Microsoft Windows XP Professional
Microsoft Windows Server 2008 Itanium

Description

This utility is used to upgrade the firmware on the HP T1000 G2, Japan/Taiwan model UPS.

Installation Instructions

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

4f6ad5402b26faab54e298e9d8eb753c SP38390.EXE

Installation:

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change
to that directory.  The file that is downloaded is an executable with
a filename according to the SP Number above.

2. Run the SP executable to unpack the firmware and release information.

3. From that SP directory, use the detailed instructions located in
the file to perform the upgrade.

4. Please read the procedures before upgrading.


Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


 

This firmware fixes the 14 day timer self test Low (Battery) Voltage Cutoff threshold which was inadvertently

set too high causing a false 'Replace Battery' error.

 

Revision History

Version:2360 Rev A (1 Feb 2008)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


 

This firmware fixes the 14 day timer self test Low (Battery) Voltage Cutoff threshold which was inadvertently

set too high causing a false 'Replace Battery' error.

 


Version:692233 Rev E (15 Oct 2007)
Fixes

Fixed the self test bug by integrating 2314 x016:
An issue was fixed in the disconnected battery test routine that causes an erroneous replace battery fault in the event that VbattAtSelfTestStart is greater than InstantVBatt. 

(Meaning vbatt after disconnected vbatt test is greater than it was before the test)

 

 


Version:692233 Rev E (15 Oct 2007)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


 This firmware fixes a condition that shows every 2 weeks when the 14-day timer test section of the disconnected battery test routine runs. The timer test causes an erroneous ‘Replace Battery’ fault when the value "VbattAtSelfTestStart" is greater than "InstantVBatt". The battery failure condition can be cancelled manually by performing the manual battery test in HP Power Manager.

 

 


Version:692233 Rev D (23 Jul 2007)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


 This firmware 692233 Rev D fixes the following issues:

1. UPS may wake up early after scheduled shutdown. 

2. When the UPS is in a cold environment, the UPS may report to the software that the UPS internal temperature is very high. 


Version:692233 Rev C (31 Aug 2006)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


This fix corrects an error that causes, on rare occasions, the auto restart flags to not work properly. 

The transition from Standby to Line, via the Delay-Before-Startup option, now resets receptacles that are configured to ramp. 

The Cut (buck) point for the 100V setting has been changed as follows:
Original values: Cut1Set = 106V; Cut1Reset = 103V
New Values:     Cut1Set = 111V; Cut1Reset = 106V

(Please note that this change applies to all models that have the 100V selection.)

Limited the maximum ramp and shed delays to 2^16 sec (65536 sec = 1092 min = 18.2Hr).