Printable version

Drivers & software

Important Note Not the product you are looking for? If you cannot find your product on this site, go to HP Support Center .

* RECOMMENDED * HP T750 G2 and HP T1000 G3 Uninterruptible Power System NA and INTL Firmware Update

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - UPS
Version: 1.08(21 Oct 2011)
Operating System(s): OS Independent
File name: SP55009.EXE (1.6 MB)
This softpaq includes firmware for the HP T750 G2 and HP T1000 G3 Uninterruptible Power System (UPS). Detailed instructions for performing the firmware update are included in the softpaq.

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

25e09a56361f3164845b739279c23ea3 SP55009.EXE

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Download the SoftPaq to a directory on your hard drive and change to that directory.

The file that is downloaded is an executable with a filename according to the SP Number.

Run the SP executable to unpack the firmware and release information.

From that SP directory, use the detailed instructions located in the HP T750 G2 and HP T1000 G3 UPS Firmware Update Instructions.pdf file to perform the update.

 


End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Supported Devices and Features:

  • AF446A  HP T750 G2 NA UPS
  • AF447A  HP T750 G2 INTL UPS
  • AF448A  HP T1000 G3 NA UPS
  • AF449A  HP T1000 G3 INTL UPS

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Modified the UPS input waveform detection scheme sub routine. This repaired a unique case in the firmware that delayed the UPS transfer time to battery operation when utility dropped down from 100 volts to 60 volts for Japanese models (161V for high voltage and 84V for low voltage) under certain conditions.
  • Modified the Advanced Voltage Regulation (AVR) detection scheme by reducing the number of cycles required to detect an out of tolerance voltage condition. This repaired an issue in the firmware that allowed the UPS to stay in its current AVR mode and not perform a buck or boost cycle quick enough.  This issue resulted in the output voltage falling outside of the output voltage specification when utility dropped down from 100 volts to 60 volts under certain conditions.
Version:1.08 (21 Oct 2011)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Modified the UPS input waveform detection scheme sub routine. This repaired a unique case in the firmware that delayed the UPS transfer time to battery operation when utility dropped down from 100 volts to 60 volts for Japanese models (161V for high voltage and 84V for low voltage) under certain conditions.
  • Modified the Advanced Voltage Regulation (AVR) detection scheme by reducing the number of cycles required to detect an out of tolerance voltage condition. This repaired an issue in the firmware that allowed the UPS to stay in its current AVR mode and not perform a buck or boost cycle quick enough.  This issue resulted in the output voltage falling outside of the output voltage specification when utility dropped down from 100 volts to 60 volts under certain conditions.

Version:1.06 (2 Nov 2010)
Enhancements

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  1. Change the XCP Communication max wattage rating from 500Watts to 650Watts for the HP T1000 G3 Model.
  2. Change the XCP Communication max wattage rating from 450 Watts to 500 Watts for the HP T750 G2 Model.

Version:1.04 (6 Mar 2009)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial product firmware release.



Subscribe to driver and support alerts

Sign up now for customized driver, security, patch, and support email alerts.
Type: Firmware - UPS
Version: 1.08(21 Oct 2011)
Operating System(s):
OS Independent

Description

This softpaq includes firmware for the HP T750 G2 and HP T1000 G3 Uninterruptible Power System (UPS). Detailed instructions for performing the firmware update are included in the softpaq.

Installation Instructions

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

25e09a56361f3164845b739279c23ea3 SP55009.EXE

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.


Installation:

Download the SoftPaq to a directory on your hard drive and change to that directory.

The file that is downloaded is an executable with a filename according to the SP Number.

Run the SP executable to unpack the firmware and release information.

From that SP directory, use the detailed instructions located in the HP T750 G2 and HP T1000 G3 UPS Firmware Update Instructions.pdf file to perform the update.

 


Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Supported Devices and Features:

  • AF446A  HP T750 G2 NA UPS
  • AF447A  HP T750 G2 INTL UPS
  • AF448A  HP T1000 G3 NA UPS
  • AF449A  HP T1000 G3 INTL UPS

Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Modified the UPS input waveform detection scheme sub routine. This repaired a unique case in the firmware that delayed the UPS transfer time to battery operation when utility dropped down from 100 volts to 60 volts for Japanese models (161V for high voltage and 84V for low voltage) under certain conditions.
  • Modified the Advanced Voltage Regulation (AVR) detection scheme by reducing the number of cycles required to detect an out of tolerance voltage condition. This repaired an issue in the firmware that allowed the UPS to stay in its current AVR mode and not perform a buck or boost cycle quick enough.  This issue resulted in the output voltage falling outside of the output voltage specification when utility dropped down from 100 volts to 60 volts under certain conditions.

Revision History

Version:1.08 (21 Oct 2011)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Modified the UPS input waveform detection scheme sub routine. This repaired a unique case in the firmware that delayed the UPS transfer time to battery operation when utility dropped down from 100 volts to 60 volts for Japanese models (161V for high voltage and 84V for low voltage) under certain conditions.
  • Modified the Advanced Voltage Regulation (AVR) detection scheme by reducing the number of cycles required to detect an out of tolerance voltage condition. This repaired an issue in the firmware that allowed the UPS to stay in its current AVR mode and not perform a buck or boost cycle quick enough.  This issue resulted in the output voltage falling outside of the output voltage specification when utility dropped down from 100 volts to 60 volts under certain conditions.

Version:1.06 (2 Nov 2010)
Enhancements

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  1. Change the XCP Communication max wattage rating from 500Watts to 650Watts for the HP T1000 G3 Model.
  2. Change the XCP Communication max wattage rating from 450 Watts to 500 Watts for the HP T750 G2 Model.

Version:1.04 (6 Mar 2009)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.


Initial product firmware release.