Printable version

Drivers & software

Important Note Not the product you are looking for? If you cannot find your product on this site, go to HP Support Center .

* RECOMMENDED * HP Uninterruptible Power System Network Module (AF465A) Firmware

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - Management
Version: 1.02.001(16 Jun 2014)
Operating System(s): OS Independent
Obtain software
Firmware version 1.02.001 for the HP UPS Network Module

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

1.  When you click the download button you will be sent to a HP Software Depot site
2.  Once you are on the Software Depot site, enter the requested information to download the free file
3.  When the Download Software and License page appears, click the Get Software link
4.  Download the zip file to a local drive
5.  Extract contents of the zip file to a directory
6.  Change to the directory to which the zip file contents were extracted and run the executable to unpack the software 
7.  Refer to the installation instruction in the README.pdf file


End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Incorrect Japanese translation on SNMP settings web page
  • Email bug where under certain conditions an email would be sent every minute
Version:1.07.003 (23 Aug 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


The following fixes were included in this release:

  1. Update the NetOS libraries for the snmpv3 freeze issue
  2. SysLocation restricted to 10 characters, when using Japanese localization
  3. Wrong order of <CR> <LF> in the email header
  4. Card restarts, when saving daylight configuration.
  5. HTTP watchdog reset timeout extended to 60 seconds
  6. SNMP CPQ UPS output source was returning wrong value.
  7. It's now possible to disable a trap receiver.
  8. Redefinition of macros caused issues with SNMP.
Enhancements

The following features/enhancements were included in this release:

  1. Added configuration option (Show Advanced Logs) to hide some system log messages
  2. Added HTTP thread watchdog   
  3. Added support to Clear user name and password when Admin login is Disabled

  


Version:1.06.004 (10 Feb 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • HPPP Client mode: Unexpected value 0 for "Shutdown initiated after" of Master Outlet on NMC card
  • Added multi watchdog mechanism called from thread interval to reset of the card after 450 days from startup
  • DHCP search functionality improved

Version:1.05.001 (2 Sep 2015)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Fixes the CVE2015-0204 issue
  • Updates the UPS image
  • Fixes the Remaining Backup Time translation into Japanese hh:mm:ss
  • Removes the protected object page when the login box is cancelled

Version:1.04.001 (12 Mar 2015)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • The Date/Time format were fixed to comply with previous releases
  • Japanese translation system language setting is fixed
  • Japanese translation Summer time setting is fixed
  • SNMP write community setting has been corrected to match with Enable/Disable
  • Enable/Disable for Firmware upload setting was reversed
  • Enable/Disable for BootIP/DHCP setting was reversed
  • Enable/Disable for Email notification setting was reversed
  • Japanese translation item on SNMP version is fixed
  • Date setting of Schedule Shutdown was not displayed correctly
  • Fixed Enable on Shutdown settings page. System did not execute the schedule shutdown when enabled in Japanese language mode

Version:1.03.003 (9 Feb 2015)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Disables the access for 'Manual Control' and 'Scheduled Shutdown' menus when the Remote command UPS parameter is disabled 
  • Fixes an issue where the HP Network Management Card information is not displayed on G4 1U/2U UPS LCDs

Version:1.02.001 (16 Jun 2014)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Incorrect Japanese translation on SNMP settings web page
  • Email bug where under certain conditions an email would be sent every minute

Version:1.01.013 (26 Jun 2013)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • One of the load segments did not shut down when specified
  • Incorrect restart delay functionality of both load segments

Version:1.01.010 (6 Dec 2012)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • In "About your UPS", corrects the name field overrun into the next line in Firefox.
  • UPS icon information in the HELP pages are not properly aligned.
  • Removes an extra Time Tick object seen in a SNMP trap.
  • Corrects an exception error intermittently displayed during the module's initialization.
  • Corrects all Japanese translation issues with field names and Help button.

 

Enhancements

  • Allows for up to 3 administrator accounts.
  • Allows the HP Network Module to automatically update the largest shutdown delay setting from any connected client.
  • Enhanced Schedule Shutdown option, allows the setting of One Time, Daily and Weekly schedule.

Version:1.00.012 (31 May 2011)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Intial release


Initial release



Subscribe to driver and support alerts

Sign up now for customized driver, security, patch, and support email alerts.
Type: Firmware - Management
Version: 1.02.001(16 Jun 2014)
Operating System(s):
OS Independent

Description

Firmware version 1.02.001 for the HP UPS Network Module

Installation Instructions

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

1.  When you click the download button you will be sent to a HP Software Depot site
2.  Once you are on the Software Depot site, enter the requested information to download the free file
3.  When the Download Software and License page appears, click the Get Software link
4.  Download the zip file to a local drive
5.  Extract contents of the zip file to a directory
6.  Change to the directory to which the zip file contents were extracted and run the executable to unpack the software 
7.  Refer to the installation instruction in the README.pdf file


Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Incorrect Japanese translation on SNMP settings web page
  • Email bug where under certain conditions an email would be sent every minute

Revision History

Version:1.07.003 (23 Aug 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


The following fixes were included in this release:

  1. Update the NetOS libraries for the snmpv3 freeze issue
  2. SysLocation restricted to 10 characters, when using Japanese localization
  3. Wrong order of <CR> <LF> in the email header
  4. Card restarts, when saving daylight configuration.
  5. HTTP watchdog reset timeout extended to 60 seconds
  6. SNMP CPQ UPS output source was returning wrong value.
  7. It's now possible to disable a trap receiver.
  8. Redefinition of macros caused issues with SNMP.
Enhancements

The following features/enhancements were included in this release:

  1. Added configuration option (Show Advanced Logs) to hide some system log messages
  2. Added HTTP thread watchdog   
  3. Added support to Clear user name and password when Admin login is Disabled

  


Version:1.06.004 (10 Feb 2016)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


  • HPPP Client mode: Unexpected value 0 for "Shutdown initiated after" of Master Outlet on NMC card
  • Added multi watchdog mechanism called from thread interval to reset of the card after 450 days from startup
  • DHCP search functionality improved

Version:1.05.001 (2 Sep 2015)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Fixes the CVE2015-0204 issue
  • Updates the UPS image
  • Fixes the Remaining Backup Time translation into Japanese hh:mm:ss
  • Removes the protected object page when the login box is cancelled

Version:1.04.001 (12 Mar 2015)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • The Date/Time format were fixed to comply with previous releases
  • Japanese translation system language setting is fixed
  • Japanese translation Summer time setting is fixed
  • SNMP write community setting has been corrected to match with Enable/Disable
  • Enable/Disable for Firmware upload setting was reversed
  • Enable/Disable for BootIP/DHCP setting was reversed
  • Enable/Disable for Email notification setting was reversed
  • Japanese translation item on SNMP version is fixed
  • Date setting of Schedule Shutdown was not displayed correctly
  • Fixed Enable on Shutdown settings page. System did not execute the schedule shutdown when enabled in Japanese language mode

Version:1.03.003 (9 Feb 2015)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Disables the access for 'Manual Control' and 'Scheduled Shutdown' menus when the Remote command UPS parameter is disabled 
  • Fixes an issue where the HP Network Management Card information is not displayed on G4 1U/2U UPS LCDs

Version:1.02.001 (16 Jun 2014)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Incorrect Japanese translation on SNMP settings web page
  • Email bug where under certain conditions an email would be sent every minute

Version:1.01.013 (26 Jun 2013)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • One of the load segments did not shut down when specified
  • Incorrect restart delay functionality of both load segments

Version:1.01.010 (6 Dec 2012)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • In "About your UPS", corrects the name field overrun into the next line in Firefox.
  • UPS icon information in the HELP pages are not properly aligned.
  • Removes an extra Time Tick object seen in a SNMP trap.
  • Corrects an exception error intermittently displayed during the module's initialization.
  • Corrects all Japanese translation issues with field names and Help button.

 

Enhancements

  • Allows for up to 3 administrator accounts.
  • Allows the HP Network Module to automatically update the largest shutdown delay setting from any connected client.
  • Enhanced Schedule Shutdown option, allows the setting of One Time, Daily and Weekly schedule.

Version:1.00.012 (31 May 2011)
Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Intial release


Initial release